Sierra Wireless DART 200 CDPD Modem Betriebsanweisung Seite 54

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 206
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 53
DART 200 CDPD Modem User’s Guide 4 Broadcast and Multicast Operation
Sierra Wireless, Inc. 4-4
Some software stacks, used when the DART 200 operates in Serial Line
Internet Protocol (SLIP) mode, only receive broadcast messages
(including multicast) on a specific IP destination address, specifically the
point-to-point NEI. To provide for this limitation, the DART 200 permits
specifying whether or not the received destination IP Address (multicast
address) is replaced with the active point-to-point NEI before the
received packet is passed across the SLIP interface to the software stack.
This feature is implemented by using the AT*G command. AT*G1
(default) causes the received destination address to be replaced as
described above. AT*G0 passes the received packet across the SLIP
interface to the TCP stack unmodified, with the destination address being
that of the Multicast NEI.
Seitenansicht 53
1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 205 206

Kommentare zu diesen Handbüchern

Keine Kommentare