Sierra Wireless AirLink MP Betriebsanweisung Seite 215

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 237
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 214
Rev 2.0 C Aug.10 209
TCP
Table 6-9: Common: TCP
Command Description
General
S0 This register determines how the device responds to an incoming TCP
connection request. The device remains in AT Command mode until a
connection request is received. DTR must be asserted (S211=1 or &D0) and
the device must be set for a successful TCP connection. The device will send
a “RING” string to the host. A “CONNECT” sent to the host indicates
acknowledgement of the connection request and the TCP session is
established.
n=0 : Off (Default).
n=1 : On.
n=2 : Use Telnet server mode on TCP connections.
n=3 : With a Telnet connection, overrides the client's default echo,
allowing the server on the host port to perform the echo. CRLF
sequences from the telnet client will also be edited to simply pass CRs to
the server on the host port.
S7 Specifies the number of seconds to wait for a TCP connection to be
established when dialing out.
TCPT Interval to terminate a TCP connection when no in or outbound traffic. This
value affects only the TCP connection in TCP PAD mode.
n=interval
TCPS TCP connection time-out (TCPS) units. Specifies a time interval upon which if
there is no in or outbound traffic through a TCP connection, the connection
will be terminated.
n=0 : minutes
S221 Connect Delay: Number of seconds to delay the “CONNECT' response upon
establishing a TCP connection. OR Number of tenths of seconds to delay
before outputting ENQ on the serial port after the CONNECT when the ENQ
feature is enabled.
n=0 - 255
S60 Telnet Client Echo Mode.
n=0 : No Echo
n=1 : Local Echo (Default)
n=2 : Remote Echo
*ENQ Outputs an ENQ [0x05] after the TCP CONNECT delayed by the Delay
Connect Response time (S221).
n=0 : Disabled (Default).
n=1 : Enable ENQ on CONNECT.
Seitenansicht 214
1 2 ... 210 211 212 213 214 215 216 217 218 219 220 ... 236 237

Kommentare zu diesen Handbüchern

Keine Kommentare