Sierra Wireless AirLink MP Betriebsanweisung PDF herunterladen (Seite 46)

ALEOS User Guide

40 20080616

Figure 5-1: ACEmanager: LAN/WiFi - Addressing

Command Description

Host Public Mode Sets the Host Interface that uses the Public IP address grated by the cellular network or if

all should use private IP addresses. All host interfaces which are not using the public IP

address will use private IP addresses.

0 = Ethernet Uses Public IP ;

1 = All Hosts Use Private IP's - This is the default.

2 = USB Uses Public IP

3 = RS232 Uses Public IP

Note: The connected computer receives DHCP address from ALEOS and it also has

default router set up to device IP.

Device IP The Ethernet IP address of the AirLink Device. By default this is set to 192.168.13.31.

Subnet mask The subnet mask indicates the range of host IP addresses which can be reached directly.

Changing this will limit or expand the number of clients that can connect to the AirLink

Device. The default is 255.255.255.0 and means that 254 clients can connect to the AirLink

Device. Using 192.168.13. as the first three octets of their IP address if the device IP is

192.168.13.31.

Server Mode Enabled or Disabled. By default, the Ethernet DHCP server is enabled. Disabling the

DHCP server will require all connected clients to have static IP addressing.

DHCP Network Mask The Netmask given to any Ethernet DHCP client.

Starting IP Ethernet DHCP pool starting IP address.

Note: If you have only one computer or device connected directly to the Ethernet port, this

is the IP address it will be assigned.

Ending IP The ending IP for the Ethernet Interface.

DHCP Lease time

(seconds)

Configurable DHCP lease time.

Link Radio Coverage

to Interface

This will disable the specified port when there is no cellular coverage.

1 = Ethernet; 2 = USB

Radio Link Delay

(Seconds)

The delay in seconds before the radio link goes down.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 236 237

Keine Kommentare

Sierra Wireless AirLink MP Betriebsanweisung Seite 46