UMTS AirCard⁄AirPrime Supported AT Command Reference
52 Proprietary and Confidential 2130617
!REL
Supporting chipsets:
• All
Return active protocol/revision
This command is used to indicate the modem’s current protocol, SGSN, and MSC
revision settings.
Usage:
• Query: AT!REL?
Response:
!REL:
Protocol: Release 5
(from <wcdmarrc>)
SGSN Revision: Dynamic (from <sgsnr>)
MSC Revision: Dynamic (from <mscr>)
OK
Purpose: Report the current operating protocol, SGSN revision, and MSC
revision.
• Query List: AT!REL=?
Purpose: Display a list of valid parameter values.
Parameters:
Note: Some parameter values may differ (or not appear) based on device or firmware
revision.
<wcdmarrc> (Protocol):
• Default value is the highest release supported by the device.
• Two-digit number corresponding to 3GPP release (!REL=? shows valid values)
• Example: 00=Release 99
<sgsnr> (SGSN revision):
• Two-digit number corresponding to SGSN revision (!REL=? shows valid values)
• Example: 00=Release 97
• nn=Dynamic—Uses the revision broadcast by the network
<mscr> (MSC revision):
• Two-digit number corresponding to MSC revision (!REL=? shows valid values)
• Example: 00=Release 97
• nn=Dynamic—Uses the revision broadcast by the network
!RESET
Supporting chipsets:
• All
Reset modem
Perform a modem reset.
Usage:
• Execution: AT!RESET
Response:
OK
Purpose: Reset the modem.
Note: This command is identical in function to !GRESET.
Table 3-2: Modem status, customization, and reset commands (Continued)
Command Description
Kommentare zu diesen Handbüchern