Sierra Wireless AirCard 503 Spezifikationen Seite 74

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 94
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 73
UMTS AirCardAirPrime Supported AT Command Reference
74 Proprietary and Confidential 2130617
+WPOWER (Continued)
Return average WCDMA power level over time period (continued)
<rxm> (Average Rx main power, single carrier)
<rxm0> (Average Rx main power, first carrier for dual carrier device)
<rxm1> (Average Rx main power, second carrier for dual carrier device)
<rxd> (Average Rx diversity power, single carrier)
<rxd0> (Average Rx diversity power, first carrier for dual carrier device)
<rxd1> (Average Rx diversity power, second carrier for dual carrier device)
<tx> (Average Tx power on main antenna):
Signed int16 (2 bytes)
Typical range -120dBm to -20dBm
+WTBI
Supporting chipsets:
MDM6200 (min f/w rev:
P0_0_7_1)
Enable/disable GSM/GPRS Tx Burst indication
Enable use of DIO channel 1 (GPIO_0) to indicate an upcoming GPRS Tx burst. (GSM/
GPRS/EDGE mode only)
When enabled, the modem:
Asserts the GPIO ~200 µs before a Tx burst starts. (Provides time for the host to
turn off peripherals before the burst.)
Deasserts ~40 µs after the burst completes. (Provides time to ensure RF activity is
finished.)
Note: If DIO channel 1 has been programmed as an input or output using AT!DIOCFG,
the indication cannot be enabled.
Usage:
Execution: AT+WTBI=<state>
Response: OK
Purpose: Enable/disable the Tx Burst indication.
Query: AT+WTBI?
Response:
+WTBI: <state>
OK
Purpose: Display the current indication state (enabled/disabled).
Query List: AT+WTBI=?
Purpose: Display valid parameter values.
Parameters:
<state> (Indication state, stored in NV memory):
0=Disabled (Default)
1=Enabled
Table 3-2: Modem status, customization, and reset commands (Continued)
Command Description
Seitenansicht 73
1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 93 94

Kommentare zu diesen Handbüchern

Keine Kommentare