Modem Status, Customization, and Reset Commands
Rev 7 May.12 Proprietary and Confidential 65
^SYSCONFIG
Supporting chipsets:
• MDM6200
• MDM8200 (min f/w rev:
M2.0 Release 1)
• MSM6290
Set/return system configuration information
Set or return the modem’s configuration.
Usage:
• Execution: AT^SYSCONFIG=<mode>, <acqOrder>, <roam>, <srvDomain>
Response:
OK
Purpose: Set the various configuration parameters. You must specify all of the
parameters.
• Query: AT^SYSCONFIG?
Response:
<mode>, <acqOrder>, <roam>, <srvDomain>
OK
Purpose: Return the current modem configuration information.
Parameters:
<mode> (Supported system mode):
• 2=Auto-select
• 13=GSM only
• 14=WCDMA only
• 16=No change—use this value with ^SYSCONFIG= if you do not want to change
the current setting.
<acqOrder> (Network acquisition order)
• 0=Automatic
• 1=GSM, then WCDMA
• 2=WCDMA, then GSM
• 3=No change—use this value with ^SYSCONFIG= if you do not want to change the
current setting.
<roam> (Roaming support)
• 0=Not supported
• 1=Supported
• 2=No change—use this value with ^SYSCONFIG= if you do not want to change the
current setting.
<srvDomain> (Service domain support)
• 0=Circuit-switched only
• 1=Packet-switched only
• 2=Circuit- and packet-switched
• 3=Any
• 4=No change—use this value with ^SYSCONFIG= if you do not want to change the
current setting.
Table 3-2: Modem status, customization, and reset commands (Continued)
Command Description
Kommentare zu diesen Handbüchern