Modem Status, Customization, and Reset Commands
Rev 7 May.12 Proprietary and Confidential 53
+RSCP
Supporting chipsets:
• All
Return Received Signal Code Power (RSCP) (WCDMA only)
Return the RSCP of the active set’s three strongest cells.
Usage:
• Query: AT!RSCP?
Response (Single carrier cells):
+RSCP:
RSCP: <value1> dBm [<value2> dBm [<value3> dBm]]
Response (Dual carrier cells):
+RSCP:
Car0 RSCP: <value1> dBm [<value2> dBm [<value3> dBm]]
Car1 RSCP: <value4> dBm [<value5> dBm [<value6> dBm]]
•
Purpose: Return the RSCP values (signed dBm) of up to three cells, from the
strongest to weakest cell.
Parameters:
<value n> (RSCP of cell in the active set):
• Valid range: -120 dB to -20 dB
!SCACT
Supporting chipsets:
• All
Activate/deactivate PDP context for FIFO interface
Activate or deactivate the specified PDP context for FIFO interface.
Usage:
• Execution: AT!SCACT=<state>[,<pid>]
Response:
OK
Purpose: Set the state of the identified profile (<pid>). If no <pid> is specified,
profile 1 is updated.
• Query: AT!SCACT?[<pid>]
Response:
!SCACT: <pid>, <state>
[!SCACT: <pid>, <state>
[...] ]
Purpose: Report the status of the identified profile (<pid>). If no <pid> is
specified, the status of all profiles is returned.
Parameters:
<state> (PDP context activation state):
• 0=Deactivated
• 1=Activated
• During assignment, any <state> other than 1 or 2 returns an ERROR response.
<pid> (PDP context definition):
• Valid range: 1–16
Table 3-2: Modem status, customization, and reset commands (Continued)
Command Description
Kommentare zu diesen Handbüchern